When you’re looking for a table saw, the first consideration should be how and where you plan to use it. Do you need a compact model for working in a small shop or a portable option for DIYing on the go?
Do you have a dedicated space for woodworking and need a heavier-duty model or are you just looking for an option to use on occasion?
If you’re a beginner, do you need a tool that includes on-board accessories like a ruler and pencil holder or will you be using it so infrequently that it’s not worth paying extra for those features?
All of these questions and more must be answered before you can select the best table saw for you. That’s why we decided to do some research and round up the best cheap table saws for a range of needs and budgets.
Our Editor’s Best Cheap Table Saws Reviews
1. DEWALT DWE7485WS 8-1/4 in. Compact Jobsite Table Saw With Stand
This is a small, easy-to-carry table saw that can be stored easily. This is a type of fence where the rails can be adjusted by a rack and pinion system, which is a system that uses gears. This type of fence is known for being easy to adjust, and for being very accurate.
The table saw has a rip capacity of 24.5 inches, which means it can rip through 4×8 plywood or OSB sheets. If there is a power disruption while the tool is in use, it will automatically reset once the power is back on.
The “Blade Brake” is a device that is attached to the blade of a saw that allows the user to stop the blade quickly. This is a useful safety feature for saws that are used frequently.
Read More: Best Cast Iron Table Saws
2. DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
The Dewalt table saw comes with a 10 inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, and blade guard assembly manual.
This is a 15-amp table saw that can rip boards up to 22 inches wide to the left of the blade and 32 and a half inches to the right. It can also make dado cuts up to 13/16 of an inch wide. The arbor size is 5/8 of an inch.
When making a cut at a 45-degree angle, the maximum depth is 2 and a quarter inches. When making a cut at a 90-degree angle, the maximum depth is 3 and an eighth inches. The no-load speed is 4,800 RPM.
This rolling stand is designed for easy set up and breakdown, and is also very stable. This is a system that makes it easy to adjust your fence, quickly and smoothly, so that it is always accurate. This is a powerful saw that can cut through pressure treated lumber and hardwoods easily.
Read More: Best Cordless Table Saws: Reviews & Buying Guide
3. Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories
This table saw is easy to move around and set up, and has a built-in carry handle. The saw has a standard guard and riving knife system that allows the user to perform rip, cross, scroll, and miter cuts.
This is a jigsaw that uses a standard 4″ T-shank blade. The jigsaw comes with 5 blades to get you started cutting wood, ceramic tile, plastic, aluminum, and metal.
The miter saw can make precise cuts at different angles, making it useful for various woodworking projects. The base of the saw can hold the miter gauge, rip fence, and extra blades when they are not in use.
This is a safety feature that prevents the saw from being turned on accidentally. There is also a vacuum port that allows you to hook up a shop vac to the saw. This will clean up any debris that is created while you are cutting.
Read More: Top 10 Table Saws Under $1000
4. POWERTEC 71651 110/220V Paddle Switch with Screws for Gang Box Installation, fits Table Saw, Router Table, Drill Press, Bench Saw, Band Saw
This is a paddle switch with a hardware kit for installation into a deep gang box or single gang box with extension. The gang box is not included.
The KIT FUNCTION is a master or emergency power off safety switch box designed to safeguard your table saws, drill press, belt sanders, jointers, dust collectors and other woodworking machines.
This table saw includes two #6-32 screws and nuts, which can be used to replace the original M4 assembly hardware. This is useful for installing the included 71007 switch into deep gang boxes, or forstandard gang boxes with extension rings, or for other installations that require 6-32 screws.
The switch is easy to install and use. Push the green start to turn the machine on. Push the red stop paddle to shut off the machine.
The saw has a dual voltage, single phase extension ring that is rated for 2 horsepower at 120 volts and 3 horsepower at 230 volts. It is designed to fit deep gang boxes and standard gang boxes.
5. DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451)
The saw is made from heavy-duty tube steel, which makes it strong and safe to use. This is a support bar that you can use to secure a saw to a stand. It has hardware holes that you can use to fasten it in place.
This stroller is lightweight and can be easily folded and carried around. This accessory is designed to be used with the DW7480 compact job site table saw, Dcs7485 60V table saw, and DW745 compact table saw.
6. DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)
The saw is made of steel that is designed to last a long time. This saw is easy to set up and break down, and it is very stable. This saw is designed to be easily loaded and unloaded from a vehicle.
7. Genuine Fred TABLE SAW Crosscut Cake and Salad Saw, 1 Pack, off-white – TSAW
The saw comes by itself, there is only one in the package. This means that the saw is made of a durable material that is safe to use with food and can be put in the dishwasher.
This cutter is designed to look like a carpenter’s hand saw in order to make cuts more easily. The saw has a blade with a serrated (teeth) edge. This is a set of two saws. Each saw is 12 inches long and 3.25 inches tall.
8. Milescraft 1500 DustCutter – Contractor Saw Dust Collection System , Black
This saw is easy to install. This saw never needs removing to empty.
The table saw extension includes support for many different table saws, as long as the base is 20 inches wide or less and 17 inches deep or less.
This is an easy to use vacuum that can be connected to an optional vacuum. This is a 3-in-1 vacuum that can be used as a collector, funnel, or vacuum.
9. POWERTEC 70131 12-Inch Table Saw Dust Hood
This is a dust collector hood for a 12″ table saw. This is a seal for a dust collection hose that will help to keep the air quality in your workshop clean by collecting dust, dirt, and debris.
This is a versatile saw that can be attached in a variety of positions to most table saws. This is a high quality, durable dust collection system that is made to last.
This is a description of a 4-inch dust port. The outer size of the port is 12-1/4 inches by 12-1/4 inches. The port has a 4-inch outer diameter (OD) and accepts standard 4-inch inner diameter (ID) dust collector hose or 4-inch ID fittings.
What else you should know about cheap table saws
1. What are the best cheap table saws for the money?
There are a few different ways to answer this question, but we would recommend looking into the following saws:-
2. What are the best features of cheap table saws?
There is no definitive answer to this question as people’s opinions will differ. However, some possible features that could be considered include a low price, a small size, and/or light-weight.
3. How do cheap table saws compare to more expensive models?
Cheap table saws are generally not as powerful as more expensive models and may not have as many features. However, they can be a good option for people on a budget.
4. What are the pros and cons of cheap table saws?
The pros of cheap table saws are that they are usually more affordable than higher-end models and offer a good entry-level option for woodworkers. The cons are that they may not have as many features as more expensive models and they may not be as durable.
5. Are there any hidden costs associated with cheap table saws?
There are often hidden costs associated with cheap table saws. These costs can include poor quality, lack of customer support, and higher prices for replacement parts.
Conclusion
There are many great cheap table saws on the market. Our list of the best cheap table saws will help you save time researching and choosing the best one for you.