When shopping for the best circular saw blade for cutting metal, there are a few features to look for. First, it’s best to go with a carbide-tipped blade that specifically mentions cutting through metal in the product description. If you’re cutting through different types of metal, such as steel and aluminum, look for a blade that specifically mentions being able to cut through both.
Aside from the material you’re cutting through, the size of the blade matters as well. If you’re cutting a lot of large material, look for a 10-inch blade, which is usually easier to handle than a 12-inch blade. If you’re mostly cutting smaller material, such as sheet metal or thin-gauge steel, then consider a 7-inch blade.
No matter what material you’re cutting through, make sure the blade is sharp. Dull blades will damage the material and cause more vibrations, and more wear and tear on your saw.
Read on for our list of the best circular saw blades for cutting metal.
Read on for our list of the best circular saw blades
Our Editor’s Best Circular Saw Blade For Metal Reviews
Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life
Key Features:
-
The Cermet II is a circular saw blade for metal that is more efficient and productive than standard grinding discs. It has ceramic and metallic teeth that are heat tolerant and hard, so it lasts longer and doesn’t need to be replaced as often.
-
The blade is designed for metal cutting and is up to 50 times cooler than a grinding disc, which can increase the temperature of steel by up to 500 degrees. Grinding discs can also permanently discolor the steel.
-
This blade is designed for use with a circular saw and is ideal for cutting through metals or stainless steel. The blade is made of high quality materials and is designed to be up to 10 times faster than standard grinding discs, resulting in up to 60 seconds faster cuts.
-
The shopper should be aware that this circular saw blade is designed for metal, and that it has a “triple chip” cutting action that reduces sparks and the possibility of needing a permit.
-
The circular saw blade for metal is designed for maximum stability and accuracy, with laser cut stabilizer vents to trap noise and vibration. The blade is also designed to stay cool during use.
Norske Tools NCSBP210 6-1/2 inch 48T Metal Cutting Saw Blade For Steel Roofing, Metal Siding, Steel Pipe, Steel Studs & More 5/8 inch Bore with Diamond Knockout
Key Features:
-
This is a circular saw blade for metal that is 6-1/2 inches in diameter and has 48 teeth. It is designed for use with a circular saw and is made of metal.
-
This circular saw blade for metal is designed for high performance cutting of steel roofing, metal siding, steel pipe, and steel studs. It is made from high quality materials and is built to last.
-
This circular saw blade is designed for use with metal, and has a 0° hook angle which reduces the risk of overfeeding, jamming, tooth breakage and kickback.
-
The MTCG blade is a great choice for anyone who needs to do a lot of metal cutting. The modified triple chip grind makes it easier to cut through metal, and the blade is also less likely to get bogged down in the material.
-
This circular saw blade is designed for cutting metal. It is made of micro-grain carbide, which is a very hard and durable material. The tips of the blade are sharpened to a fine point, which allows it to cut through metal very easily.
Evolution Power Tools 14BLADEST Steel Cutting Saw Blade, 14-Inch x 66-Tooth , Blue
Key Features:
-
The circular saw blade is made of high-grade Carbide, has a hardened blade body, and is brazed with ultra high-grade techniques. It is designed to deliver maximum performance.
-
The circular saw blade for metal is made of premium quality materials and is designed to last long. It is ideal for use on metals and can handle even the toughest metal cutting jobs.
-
This circular saw blade is designed for use with Evolution saws or other low RPM saws, and is designed to increase performance.
-
This circular saw blade is designed for cutting metal. It has a speed of 1600 RPM.
-
This circular saw blade is made for cutting metal and has 66 carbide teeth to help make clean, precise cuts. It has a .094-inch kerf, which is the thickness of the blade, and is designed to work with a variety of different saws.
-
This saw blade is for cutting metal and has a 1-inch arbor size.
ENERTWIST 4-1/2 Inch Compact Circular Saw Blade Set, Pack of 4-Pieces TCT/HSS/Diamond Saw Blades Assorted for Wood/Plastic/Metal/Tile Cutting, 3/8in Arbor, ET-CSA-4
Key Features:
-
This is a set of 4 circular saw blades for different materials. The two TCT blades are for wood, the HSS blade is for metal, and the diamond blade is for concrete or stone. They are all 4-1/2″ in diameter with a 3/8″ arbor, and have a maximum speed of 7000 rpm.
-
This is a circular saw blade that is compatible with the Enertwist ET-CS-20C, Tacklife TCS115A, Worx WX429L, Galax PRO, Rockwell RK3441K, and RK3440K 4-1/2 inch mini circular saws.
-
The blade is 24 inches in diameter and has carbide-tipped teeth for long-lasting cutting in wood, plastic, and other soft materials.
-
The 60T HSS saw blade is a fast and smooth cutting blade that can be used on wood, plastic, aluminum, metal, and drywall.
-
This is a circular saw blade that is designed for cutting through tough materials like ceramic tile, concrete, stone tile, and cement. It has a segmented design that makes it more efficient at cutting through these materials.
IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece
Key Features:
-
This circular saw blade is designed to cut through steel, angle iron, and sheet metal. It is not to be used on high speed saws.
-
This circular saw blade is designed for cutting metal. It is made of resin-bonded aluminum oxide for faster cutting. It is a Type 1 blade, which means it is for cutting only and not for grinding.
-
This circular saw blade features a double reinforcement with fiberglass mesh for both durability and safety.
-
This circular saw blade is designed for cutting metal and is reinforced with metal for extra strength.
-
This circular saw blade is for metal and is 10-inches in diameter with a 3/32-inch width and a 5/8-inch arbor. The maximum RPM is 6,100.
Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade
Key Features:
-
This is a circular saw blade for metal that is 8 inches in size with 42 teeth. It is very durable and can be used to cut through steel studs, angle iron, flat bar, channel, EMT conduit, and all-thread. It has a maximum RPM of 9000.
-
The circular saw blade is made of a cermet and carbide blend, which makes it ideal for cutting metals. The blade is also designed to last three times longer than a standard carbide blade.
-
The circular saw blade is designed for cutting metal and has laser-cut stabilizer vents to trap noise and vibration. The blade also has a cooling feature to keep it cool during use.
-
This circular saw blade is designed for cutting metal and features a triple chip grind that provides durability and burr-free cuts.
-
This circular saw blade is for metal and is spark free. It is compliant with “hot work” laws, so you may not need a permit for it depending on where you live.
Milwaukee 5 Pack – 7 Inch Cut Off Blades for 7.25″+ Circular Saws – Aggressive Cutting for Metal & Stainless Steel – 7″ x .09 x 5/8-Inch
Key Features:
-
The Milwaukee 5 Premium Metal & Stainless Steel Cut Off Blades are designed for 7-inch grinders and circular saws. The blades are made of high-quality steel and are 7.25 inches in diameter. The blades have a standard 5/8-inch arbor and are designed for use with grinders and circular saws.
-
The circular saw blade is designed for fast, straight cuts with minimal burr. It has a cutting speed of up to 50% faster than the industry standard, and lasts up to 20% longer.
-
This circular saw blade is designed for cutting metal and stainless steel. It has a high cutting speed and can last longer than other similar blades.
-
The Milwaukee 7 1/4″ Circular Saw Blade for Metal is designed for use with Milwaukee 7 1/4″ circular saws and worm drive circular saws. It has a standard 5/8″ arbor size.
-
The blade is designed for consistent performance and is balanced to reduce vibration while cutting. It is manufactured by Milwaukee Electric Tool Corp in Brookfield, Wisconsin.
TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor
Key Features:
-
This circular saw blade is ideal for cutting through plastic, aluminum, and other non-ferrous metals. Its sharp teeth and durable construction make it perfect for a variety of applications, both in the workshop and on the jobsite.
-
This circular saw blade has construction grade carbide teeth that provide maximum resistance for a longer life.
-
This is a circular saw blade for metal that has an electrophoretic coating. This coating reduces the amount of rusting and corrosion that can occur on the blade.
-
This circular saw blade is designed for making precision cuts on non-ferrous metals, aluminum, and plastic items. It has a TCG (tungsten carbide-tipped) grind for a durable and smooth cut.
-
The TOMAX circular saw blade for metal is made with quality in mind and comes with a limited lifetime warranty to back it up. Whether you’re a professional contractor or a DIYer, this blade will get the job done right.
Luckyway 10 Inch 52 Teeth with 5/8 Inch Arbor Multi-Purpose TCT Circular Saw Blade for Cutting Wood, Aluminum and Non-Ferrous Metals
Key Features:
-
This circular saw blade for metal is 10*5/8*52T Multi-purpose TCT.
-
This circular saw blade is ideal for cross-cutting wood, plastic, aluminum, and metal. It is suitable for miter saws and table saws.
-
The circular saw blade is made of hardened steel and is designed to be accurate and resist bending and deflection.
-
This is a circular saw blade for metal that has a TCG (Triple Chip Grind) design and is made of steel. It has a super-thin laser cut kerf for easy cutting and a high-density carbide that stays sharper longer. The Perma-Shield nonstick coating protects the blade.
-
This circular saw blade for metal is made of 65Mn steel and has a special tooth design for fast, safe cutting.
Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade
Key Features:
-
This circular saw blade is for cutting metal and is made with cermet blend teeth which are designed to withstand impact, reduce wear, and last up to three times longer than standard carbide teeth.
-
The circular saw blade for metal is designed for maximum stability, accuracy, and noise and vibration reduction in metal cutting applications. The blade features laser cut stabilizer vents that trap noise and vibration, keeping the blade cool and accurate.
-
The blade is designed to cut through metal quickly and easily without leaving behind any unsightly marks or burrs.
-
This circular saw blade for metal has a three metal brazing system that allows the metal cutting carbide tips to withstand extreme impact for maximum durability.
-
This circular saw blade is designed for cutting metal without creating sparks. It is compliant with “hot work” regulations, which means that you do not need a permit to use it on jobsites (check local laws).
Circular Saw Blade For Metal FAQs
1. What type of metal is the blade made of?
The blade is made of carbon steel.
2. How is the blade attached to the saw?
Most saws have the blade attached with screws, but some may have a bolt that goes through the center of the blade.
3. How does the blade cut through metal?
The blade is made of metal, and is very sharp. It cuts through metal by very quickly moving back and forth and vibrating.
4. How long does the blade last?
The blade lasts for three days.
5. How do I sharpen the blade?
The blade can be sharpened with a sharpening stone or a honing rod.
Conclusion
There are many great circular saw blade for metal on the market. Our list of the best circular saw blade for metal will help you save time researching and choosing the best one for you.
