Read on to learn more about our favorite jigsaw blades for hardie board.
Our Editor’s Best Jigsaw Blade For Hardie Board Reviews
Carbide Jigsaw Blades 8X Universal U Shank Scroll Jigsaw Blades Drywall Hardie Board Fiberglass Jigsaw Blade Low Density Tile Saw Blades Cutting Backerboard and Abrasive Materials Grit Edge Smooth
Key Features:
-
The jigsaw blade is made of carbide, which is a hard material. It is designed for making cuts in hard materials. The blade has teeth that cannot be removed.
-
This jigsaw blade is designed for use with hardie board. It is made of tungsten and is available in a set of 8.
-
This is a scroll saw blade that is 3″ long and 1/4″ wide. It is specifically designed for cutting wavy lines, but regular width blades are also available.
-
This is a jigsaw blade that is designed for making scroll cuts in hardie board. The blade is narrow to allow for tighter radius cuts, and the feed speed is lower to allow for more control when making these cuts.
-
This jigsaw blade is made of tungsten, which is a very strong and durable material. It is designed to cut through hardie board, which is a type of siding used on homes. It is a very sharp blade and should last a long time.
CMT JT141HM-3 Carbide Tipped Jig Saw Blades for Plasterboard and Fiber Cement, T-shank (3 Pack)
Key Features:
-
This jigsaw blade is made from high quality materials that provide outstanding performance. It is ideal for cutting hardie board and other materials.
-
This jigsaw blade is designed for cutting hardie board, a type of plasterboard. It is also suitable for cutting fiber cement boards, glass fiber reinforced plastic/epoxy, and MDF.
-
This is a jigsaw blade for hardie board that has a 2-61/64 inch cutting length and 6 teeth per inch.
-
This jigsaw blade has teeth that are set to the side, making it ideal for cutting hardie board.
-
The jigsaw blade for hardie board is a three-piece set that is designed for use with hardie board. The set includes a blade for cutting through hardie board, a blade for trimming hardie board, and a blade for making intricate cuts in hardie board.
Diablo by Freud DJT141HM 4 in. 6 TPI Carbide T-Shank Jig Saw Blade for Fiber Cement & Plaster
Key Features:
-
This jigsaw blade is designed for cutting hardie board, and features an aggressive carbide tooth geometry for fast, effortless cuts.
-
This blade is designed for hardie board, which is a type of fiber cement siding. It has an enhanced carbide tip that is designed to resist impact and wear.
-
This blade is for hardie board and has a T-shank design that fits all combo and most U-shank jig saws.
-
This blade is for cutting hardie board, and is designed for maximum performance in cordless and corded jig saws.
Diablo by Freud D0704DH 7-1/4″x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor
Key Features:
-
This jigsaw blade is for cutting hardie board. It is 7-1/4 inches long and 4 teeth wide.
-
This jigsaw blade is designed for cutting hardie board, and is easy to use. It is made of high quality materials, and is designed to last.
-
This jigsaw blade is made for hardie board and is manufactured in China.
-
This is a jigsaw blade that is designed specifically for cutting James Hardie fiber cement boards. The blade is tipped with polycrystalline diamond (PCD) which makes it ideal for cutting through this tough material.
-
This is a jigsaw blade that is designed for cutting hardie board. It is made with a PCD triple chip design that offers up to 60 times longer cutting life than standard carbide blades.
-
This is a jigsaw blade that is specifically designed for cutting James Hardie fiber cement boards. It is made with a polycrystalline diamond tip that is approved by James Hardie, making it a durable and reliable blade for this specific material.
-
The PCD triple chip design is a jigsaw blade that is designed for hardie board. It offers up to 60-times longer cutting life than standard carbide blades.
-
This jigsaw blade is designed for cutting hardie board quickly and accurately, with minimal dust and debris.
-
This jigsaw blade is designed to be used on hardie board. It has an anti-vibration design to stabilize the blade and reduce noise while cutting. It also has a Non-Stick Perma-Shield coating to reduce heat.
BOSCH T141HM1 1-Piece 4 In. 6 TPI Carbide-Tipped Special for Fiber and Plaster T-Shank Jig Saw Blades
Key Features:
-
This jigsaw blade is designed for making fast, coarse cuts in plaster, cement board, fiberglass, and plasterboard. It can handle materials that are up to 2 3/8 inches thick.
-
This is a jigsaw blade that is designed for cutting hardie board. It has six carbide tipped teeth that are designed for fast cutting and durability.
-
The jigsaw blade for hardie board is perfect for construction, renovation, and remodeling. It is made of high quality materials and is very durable. It is also easy to use and is perfect for both professionals and amateurs.
-
This is a 1 piece pack of jigsaw blades for hardie board.
IRWIN 3072300 T Shank 3″ 5/32 Carbide Grit Jig Saw Blade
Key Features:
-
This jigsaw blade is for making precise cuts in hardie board. It is made from 5/32 carbide grit for long lasting durability.
-
This is a jigsaw blade for hardie board that has a T-Shank design. This design is created for better grip and stability when cutting through hardie board material.
-
This jigsaw blade is ideal for cutting hardiplank, fiberglass, and cement board.
-
This is a jigsaw blade designed for cutting hardie board. It is a relatively lightweight blade, weighing in at just under a pound.
Irwin Marathon 3071300 3″ 5/32 Carbide Grit Jigsaw Blade
Key Features:
-
This jigsaw blade is for hardie board and is made from 5/32 Carbide Grit.
-
The U-shank design is for use with hardie board. It is a jigsaw blade that has a U-shaped shank that fits into the jigsaw’s blade holder. The blade is made of high-carbon steel and has a tungsten carbide tip.
-
The jigsaw blade is ideal for cutting hardiplank, fiberglass, and cement board.
BOSCH T130DG 1-Piece 3-1/4 In. 30 Grit Diamond for Hard Tile T-Shank Jig Saw Blades
Key Features:
-
This jigsaw blade is for clean cutting in grade 5 porcelain, granite and marble, slate, glass and cement board from 3/64 inches to 1/2 inches.
-
The jigsaw blade is designed for cutting hardie board, a material known for being abrasive. The blade is coated with a diamond matrix, which is a material that is very hard and can withstand a lot of wear and tear. The blade is also sharpened to a 30 grit, which is a very fine edge that can cut through the hardest materials.
-
This jigsaw blade is designed for cutting hardie board, a type of cement board. It is a specialized blade that is ideal for professional tile installers and other trades that require precision cutting.
-
This jigsaw blade is designed for use with hardie board. It is 3-1/4 inches long overall, with a 2-1/4 inch working length.
-
This is a jigsaw blade for hardie board that comes in a pack of one.
-
The blade is designed for clean cuts in materials such as porcelain, granite, marble, slate, glass, and cement board. It is 3/64″-1/2″ in size.
6-1/2 X 4 PCD Fiber Cement DIAB, Multi, One Size (D0604DH)
Key Features:
-
This is a jigsaw blade designed for cutting hardie board, a type of fiber cement siding. It is 6-1/2 inches long and has 4 PCD (pitch circle diameter) teeth.
-
This is a jigsaw blade that is specifically designed for cutting hardie board, which is a type of fiber cement. It is six and a half inches long and has a four-point carbide-tipped design.
-
This is a jigsaw blade for cutting hardie board. It is 6-1/2 inches long and has a 4-point carbide-tipped (PCD) cutting head. The blade is designed for use with a fiber cement saw.
-
This jigsaw blade is designed for use with hardie board, a type of fiber cement. It is 6-1/2 inches long and has a 4-inch pcd (pitch circle diameter). The blade is made of high-quality materials for durability and long life.
-
This jigsaw blade is designed for cutting hardie board, a type of fiber cement siding. It is six and a half inches long and four inches wide, with a PCD (polycrystalline diamond) coating.
BOSCH T313AW3 3-Piece 6 In. Knife Edge Special for Soft Materials T-Shank Jig Saw Blades
Key Features:
-
This blade is designed for use with a jigsaw to cut through hardie board, a type of cement board. It can also be used to cut through other soft materials like cardboard, leather, and carpeting.
-
This jigsaw blade is designed for cutting hardie board, and can cut through single or multiple layers quickly and easily.
-
This jigsaw blade is 6 inches long and has a working length of 5 inches. It is designed for thicker materials.
-
The blade is meant for cutting hardie board, a type of fiber cement board. It is a 3 piece pack.
Jigsaw Blade For Hardie Board FAQs
1.What is the best jigsaw blade for hardie board?
The best jigsaw blade for hardie board is a T-shank blade with a fine tooth count.
2.What are the different types of jigsaw blades for hardie board?
There are several different types of jigsaw blades for hardie board, including:-Tungsten carbide blades: These are the most common type of blades and are suitable for cutting most types of hardie board.-High speed steel blades: These blades are designed for cutting hardie board at high speeds, and are ideal for use with power tools.-Diamond blades: These are the most expensive type of blades, but are also the most durable and can cut through hardie board and other materials with ease.
3.How do you choose the right jigsaw blade for hardie board?
When choosing a jigsaw blade for hardie board, you will want to consider the thickness of the board and the type of material you are cutting. For example, if you are cutting hardie board that is 1/2-inch thick, you will want to use a blade that is designed for cutting hardie board or other materials that are 1/2-inch thick.
4.How do you change the jigsaw blade on a hardie board?
To change the jigsaw blade on a hardie board, you will need to remove the old blade and insert the new one.
5.What are the dangers of using the wrong jigsaw blade on hardie board?
The dangers of using the wrong jigsaw blade on hardie board include breaking the blade, damaging the material, and creating a poor cut.
Conclusion
There are many great jigsaw blade for hardie board on the market. Our list of the best jigsaw blade for hardie board will help you save time researching and choosing the best one for you.