• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
handytoolsworld

HandyTools World

  • Home
  • Power Tools
    • Saws
      • Band Saw
      • Chainsaw
      • Circular Saw
      • Chop Saw
      • Coping saw
      • Fret Saw
      • Hack Saw
      • Hand Saw
      • Jig Saw
      • Miter Saw
      • Pole Saw
      • Scroll Saw
      • Reciprocating Saw
      • Skil Saw
      • Table Saw
      • Tile Saw
      • Track Saw
    • Air Compressor
    • Nailers
      • Brad Nailer
      • Finish Nailer
      • Flooring Nailer
      • Framing Nailer
      • Nailers & Staplers
    • Drills
    • Planers & Jointers
    • Sanders
    • Trimmers
  • Woodworking
  • Best Tools
  • Contact
You are here: Home / Circular Saw / Best Straight Edge For Circular Saw

Best Straight Edge For Circular Saw

For most DIYers, a circular saw is a go-to power tool for ripping up plywood for shelves, cutting up doors for a project, or making cuts along a wall. A straight edge helps guide cuts so they’re more accurate, but to find out which one is best for your needs, we turned to reviews from DIYer’s who have tested out these tools for themselves.

Read on for our favorite straight edges for circular saws, as well as tips on how to choose the best one for you.

# Preview Product Price
1 BORA 100 BORA 100″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100 $94.99 Buy on Amazon
2 BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410 BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410 $99.99 Buy on Amazon
3 BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050 BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050 $49.99 Buy on Amazon
4 ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch) ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch) $114.92 Buy on Amazon
5 ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp) ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp) $64.98 Buy on Amazon
6 DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router $36.99 Buy on Amazon
7 Bora 5pc WTX Premier Set For Straight Cuts With Your Circular Saw, 545510 Bora 5pc WTX Premier Set For Straight Cuts With Your Circular Saw, 545510 $109.99 Buy on Amazon
8 BORA New 48 BORA New 48″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, 48-Inch Cutting Length, 546050 $49.99 Buy on Amazon
9 Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K $184.17 Buy on Amazon
10 BORA New 36 BORA New 36″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, 36-Inch Cutting Length, 546036 $46.00 Buy on Amazon

Our Editor’s Best Straight Edge For Circular Saw Reviews


BORA 100″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100

 BORA 100

Key Features:

  • This straight edge for circular saw is easy to adjust from one side, thanks to the clamping end that moves with the handle.

  • The locking handle helps the user grip the work surface more securely so that the circular saw doesn’t budge.

  • This is a heavy-duty straight edge made of rigid aluminum, designed for extreme durability.

  • This straight edge is perfect for use with circular saws, routers, Jig saws, and other portable power tools. It’s made of durable materials and is easy to use, so you can get the job done quickly and efficiently.

  • This straight edge is designed for use with a circular saw, and includes a 50-inch clamp edge and 50-inch extension piece with connectors.

$94.99 Buy on Amazon


BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410

 BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410

Key Features:

  • The straight edge for circular saw is designed to help make straight, clean cuts on material. It includes 24-inch and 50-inch WTX clamp edges, 50″ extension with connectors, and a saw plate.

  • The WTX Clamp Edge is a straight edge made of heavy-gauge, extruded aluminum for extreme durability. It is designed to be used with a circular saw for making straight cuts.

  • This is an adjustable straight edge for a circular saw that fits a wide variety of straight edges up to 3.5” wide.

  • A straight edge for circular saws that fits both right- and left-handed circular saws.

  • This straight edge is made with a ruled extrusion, which allows for easy measurements. It is also made with a circular saw, which makes it ideal for cutting through materials.

  • If you’re looking for a straight edge to use with your circular saw, this one from has a locking handle that will grab onto your work surface for a secure edge that won’t move.

  • **

    This is a replacement set for the BORA 543400 4-piece set.

$99.99 Buy on Amazon


BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050

 BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050

Key Features:

  • The Bora Clamp Edge is a straight edge that can be attached to a circular saw, allowing the user to cut boards and plywood that are too large for a table saw. The Clamp Edge is made of durable aluminum and has a non-slip grip.

  • This straight edge guide is perfect for ensuring a precise, clean cut on your circular saw projects. The wide rubberized clamp face firmly grips the material you’re cutting, without leaving any indentations, and is easily adjustable to fit the length of your project.

  • This straight edge is made of heavy-gauge, extruded aluminum, making it rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.

  • This guide is for a straight edge that can be used with any brand of circular saw. It is made of aluminum and can be extended up to 100 inches for larger projects.

$49.99 Buy on Amazon


ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

 ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

Key Features:

  • The ProGrip Straight Edge Guide is an aluminum straight edge guide with a 2-3/16 inch wide tube rail. It is designed for use with circular saws and is easy to align and clamp into place.

  • The ProGrip Straight Edge Guide is a device that helps you cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.

  • The straight edge has a low profile to make guiding the power tool along the edge easier. It also has been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides.

  • The ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.

  • This is a straight edge for a circular saw that has a lock lever on each clamp that can be secured into one of three positions. Each position provides varying amounts of pressure, so you can choose the amount of pressure you need for your project or application. The straight edge is designed to have zero side to side play and minimal deflection, so you can make clean, smooth cuts every time.

$114.92 Buy on Amazon


ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

 ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

Key Features:

  • The ProGrip Straight Edge Guide is an extruded aluminum guide with a 2-3/16 inch tube rail, designed to make it easy to align and clamp into place.

  • The clamps are used to cut large sheets of plywood or to cut dado slots for bookshelves.

  • This is a guide for a circular saw that is designed to be easy to use and create a straight edge. It is made with a low profile to make it easier to guide the saw and has been designed to accept many different accessories.

  • The clamp has two jaws, one of which is adjustable, and a lever to lock it in place. It is placed on the board with the fixed jaw over the end, and the adjustable jaw is drawn in against the other side of the board. Once it is set and aligned, the lever is used to lock it in place.

  • The ProGrip Straight Edge Guide Clamp is a straight edge for circular saws that has a lock lever on each clamp that can be secured into one of three positions, depending on how much pressure is needed. It is designed to have zero side-to-side play and minimal deflection for clean, smooth cuts.

$64.98 Buy on Amazon


DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router

 DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router

Key Features:

  • The DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide is a straight edge guide that can be clamped to any parallel edge workpiece. It has low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.

  • The straight edge for circular saw is an all-in-one tool that includes a smooth, straight edge and a woodworking self-clamping tool. The overall dimensions are 30.5” x 2.1” x 0.5” inches (77.5cm x 5.3cm x 1.3cm) and it stands 1.1 inches/2.8cm tall. The clamp is 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm).

  • This is a straight edge for a circular saw that is constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling. The wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory. When clamped, this solid guide shows no play and it tightly holds its grip.

  • The straight edge for circular saw is a versatile tool that can be used for a variety of tasks. It includes both inches and centimeter measurements, and is adjustable to work over the full range up to 24 inches/62cm. The T-track on the guide accepts standard accessories, including all Pro Grip accessories, and also allows complete flexibility when designing specialty fixtures in your shop. The low profile and flat top make it easy to use on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut.

  • This is a straight edge for use with a circular saw. It has two clamps that hold the wood in place, a stationary clamp on the end with a lever, and a sliding clamp that moves along the rail. To adjust the position of the clamps, you pull the sliding clamp apart until you hear a click, then adjust the clamp to the desired position on the wood. The stationary clamp has a lever that you push down to lock it into place.

$36.99 Buy on Amazon


Bora 5pc WTX Premier Set For Straight Cuts With Your Circular Saw, 545510

 Bora 5pc WTX Premier Set For Straight Cuts With Your Circular Saw, 545510

Key Features:

  • This product includes two straight edges that can be used with a circular saw, as well as a rip handle and saw plate. The edges can be clamped onto a surface, and the extension can be used to extend the reach of the saw.

  • This is a straight edge for a circular saw that is made of heavy-gauge, extruded aluminum for extreme durability.

  • This straight edge is for use with a circular saw. It has an adjustable channel on the saw plate that fits a wide variety of straight edges up to 3.5 inches wide.

  • The straight edge is for use with a circular saw and fits both right- and left-handed models.

  • This straight edge is for use with a circular saw. It is made of extruded aluminum and is ruled for easy measurements.

$109.99 Buy on Amazon


BORA New 48″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, 48-Inch Cutting Length, 546050

 BORA New 48

Key Features:

  • This straight edge is designed for use with a circular saw and has a cutting capacity of 48 inches.

  • This straight edge for circular saw has a quick lock lever for quick clamping.

  • This straight edge is made of heavy gauge, rigid aluminum, which makes it ideal for use with circular saws. It is also designed to be used with a variety of other power tools, making it a versatile addition to your tool collection.

  • This is a straight edge that is designed to be used with a circular saw. It is made to help give accurate, fast cuts every time.

$49.99 Buy on Amazon


Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K

 Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K

Key Features:

  • This is a straight edge for a circular saw that includes a 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, and T-Square Accessory.

  • The straight edge for circular saw has a clamping end that moves with the handle for easy adjustability from one side.

  • This straight edge has a locking handle that grabs work surfaces for a secure grip.

  • This straight edge is 50 inches long and can be extended to 100 inches long. It is designed for use with a circular saw.

  • This straight edge is made of heavy-gauge, rigid aluminum for extreme durability, making it ideal for use with circular saws.

$184.17 Buy on Amazon


BORA New 36″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, 36-Inch Cutting Length, 546036

 BORA New 36

Key Features:

  • This straight edge for a circular saw has a cutting capacity of 36”.

  • This straight edge for circular saw has a quick lock lever for quick clamping, making it easy and convenient to use.

  • This straight edge is made of heavy gauge, rigid aluminum, making it the perfect tool for cutting precise, clean lines with your circular saw.

  • This straight edge is perfect for anyone who wants to make fast, accurate cuts every time. It’s easy to use and ensures that your cuts are always straight.

$46.00 Buy on Amazon


Best Straight Edge For Circular Saw Buying Guide

1. Straight Edge: When it comes to choosing a straight edge, you have a lot of options. You can choose from wooden, metal, and plastic straight edges.

The material you choose should depend mainly on the kind of work you want to do with it.

For instance, if you are going to use the straight edge for cutting, you should go for a segment made from metal. It is easier to cut a straight line when you have something to guide against.

If you are going to use the straight edge to measure or draw straight lines, then you should go for a segment made from a non-magnetic material.

This is because you will be using the straight edge to draw on it. If it’s magnetic, then the pencil won’t draw a straight line.

You can also go for a magnetic straight edge if you want to be able to use it in both ways. For example, you can use it to both draw and cut a straight line.

The next thing you need to consider is the length of the straight edge. If you are going to use it with a tape measure, you will need a segment that is longer than usual.

If you want to use the straight edge for drawing straight lines, then you can get a segment that is smaller.

If you are going to use it for cutting, then you should get a straight edge that is longer than usual.

2. Straight Edge Type: Another thing you should consider when buying a straight edge is the type of straight edge you want to buy.

For example, you can choose from a folding straight edge or a straight edge that doesn’t fold.

The type of straight edge you choose will depend on the use you want to give it.

If you are going to use the straight edge to cut straight lines, then you should go for one that folds. This will make it easier to store and transport.

On the other hand, if you want to use the straight edge to draw straight lines, then you should go for one that doesn’t fold.

This is because the straight edge will be used mainly to draw straight lines, not cut them.

Another thing you need to consider is the number of scales it has. The number of scales the straight edge has will depend on the uses you want to give it.

If you want to use the straight edge for measuring, then you should get one that has more scales. This is because you will need to measure from more points.

On the other hand, if you want to use the straight edge to draw straight lines, you will have no need for extra scales.

3. Straight Edge Length: Another thing you need to consider when buying a straight edge is the length of the segment.

The length of the straight edge will depend on the kind of work you want to do with it. For example, if you want to use the straight edge for measuring, then you will need a longer straight edge.

If you want to use the straight edge to draw straight lines, then you will need a straight edge that is smaller in length.

You can also get a straight edge that has different lengths. For example, you can get one that has a long and a short side.

This will give you more flexibility when using the straight edge.

4. Straight Edge Scale Types: Another thing you need to consider when buying a straight edge is the type of scales it has. The number of scales will depend on what you want to use it for.

For example


Straight Edge For Circular Saw FAQs

1. What are the dimensions of a straight edge for a circular saw?

There is no definitive answer to this question as the dimensions of a straight edge for a circular saw will vary depending on the specific model and make of saw. However, as a general guide, the straight edge for a circular saw should be at least 18 inches long and 1 inch wide.

2. What is the best way to use a straight edge for a circular saw?

There is no definitive answer to this question as it depends on the particular saw and the specific project. However, some tips on using a straight edge with a circular saw include clamping the straight edge to the workpiece, using a guide rail (if available), and making sure the blade is properly aligned with the edge of the straight edge.

3. How do you ensure a straight cut with a circular saw?

There are a few ways to ensure a straight cut with a circular saw. One way is to use a guide. A guide can be a piece of wood or metal that you attach to the workpiece. The guide will keep the saw blade from veering off course. Another way to cut straight is to use a clamp to hold the workpiece in place. The clamp will keep the workpiece from moving while you cut.

4. What are the benefits of using a straight edge for a circular saw?

There are many benefits of using a straight edge for a circular saw. Some of these benefits include:1. It helps to ensure that your cuts are straight and accurate.2. It helps to prevent the saw from veering off course, which can lead to dangerous and inaccurate cuts.3. It helps to protect the saw blade from damage.4. It can help to extend the life of the saw blade.

5. What are some of the challenges of using a straight edge for a circular saw?

-It can be difficult to keep the straight edge in place while cutting.-The straight edge may not be long enough to reach all the way across the workpiece.-The saw may wander off the edge of the straight edge, resulting in an inaccurate cut.


Conclusion

There are many great straight edge for circular saw on the market. Our list of the best straight edge for circular saw will help you save time researching and choosing the best one for you.

December 7, 2022 by Tim Allan Filed Under: Circular Saw

Primary Sidebar

Latest Posts

Best Sander With Dust Extraction 2023

Best Sander For Trim Work 2023

Best Sander For Tight Spaces 2023

Best Sander For Small Wood Projects 2023

Best Sander For Deck Railing 2023

Best Sander For Hardwood Floors 2023

Best Sander For Furniture Refinishing 2023

Best Sander For Exterior Paint Removal 2023

Best Sander For Curved Surfaces 2023

Best Palm Sander For Woodworking 2023

Best Sander For Cabinets 2023

Best Sander For Removing Paint From Wood 2023

Best Orbital Sander With Vacuum Attachment 2023

Best Sander For Concrete Floor 2023

Best Palm Sander With Vacuum Attachment 2023

Best Sander For Auto Body Work 2023

Best Sander For Car Paint Removal 2023

Best Hand Held Sanders For Wood Furniture 2023

Best Orbital Sander For Furniture 2023

Best Drywall Sander With Vacuum 2023

Footer

  • Air Compressor
  • Band Saw
  • Best Tools
  • Blender
  • Brad Nailer
  • Chainsaw
  • Chop Saw
  • Circular Saw
  • Coping saw
  • Drills
  • Featured
  • Finish Nailer
  • Flooring Nailer
  • Framing Nailer
  • Fret Saw
  • Hack Saw
  • Hand Saw
  • Jig Saw
  • Juicer
  • Knife
  • Miter Saw
  • move
  • Nailers & Staplers
  • Planers & Jointers
  • Pole Saw
  • Reciprocating Saw
  • Sanders
  • Saw
  • Scroll Saw
  • Skil Saw
  • Table Saw
  • Tile Saw
  • Track Saw
  • Trimmers
  • Woodworking
handytoolsworld

Handytoolsworld is a collection of buying guides and user guides about various different products.

Learn More →
  • Home
  • About Us
  • Contact
  • Privacy Policy
  • Disclosure

Handytoolsworld.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Copyright © 2023 · Handytoolsworld