If your work requires a lot of framing, you probably already know the benefits of owning a track saw — it enables you to easily make precision cuts through a variety of materials and it minimizes the effort required to make those cuts.
A good track saw also makes it easier to accurately cut a variety of materials to the same length, such as crown molding or baseboard.
But finding a track saw that’s right for you can be a challenge. To help, we researched a variety of track saws and listed here to help find the best one for you.
Here are our recommendations for the best track saws currently on the market.
Our Editor’s Best Track Saw Reviews
1. POWERTEC 71423 Tracksaw Bar Clamps, 8-3/4 Inch – 2 Pack
This package includes two track saw track clamps.
This is a stop that can be used with a track saw cutting system. It is versatile and effective when used with T-tracks, in guide rail channels, or top channels.
These clamps are designed to be compatible with a variety of different brands of track saw guides, including Dewalt, Makita, and Festool. They will not work with Universal or ¼” style t-tracks.
The product is easy to use and has squeeze grip triggers for single-handed operation. It also has optimal support without limiting the position of the workpiece.
These clamps are made out of heavy duty material and are paired with non-marring pressure pads. They are able to hold a tight grip without slippage for years to come.
2. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
This track saw promises to make it easy to rip boards up to 2-1/3 inches thick, without any splinters.
It can be used to create 45-degree bevel cuts in boards that are up to 1-5/8 inches thick.
The saw is good for cutting boards or for doing internal plunge cuts.
The product includes a 6.5-inch 24-tooth carbide-tipped blade with a 20 mm arbor.
This product includes two quick screw-down clamps with a maximum opening of 5-3/8 inches and a throat depth of 2-3/8 inches.
It is designed for comfort and durability, with high quality materials that won’t damage your surfaces.
This product has a superior clamping force that will deliver a secure placement and a safe clamp action for a seamless workflow.
The saw a versatile clamp that can be used for Festool, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides. It can also be used as a MFT clamp for your homemade workbench. It is made to fit in some heavy duty T-slots.
3. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw & CT9502 100-Inch Track Saw Track Guide Rail and Adapters
This track saw allows you to rip boards up to 2-1/3 inches thick without a table saw, for clean, splinter-free cuts.
This saw can make 45-degree bevel cuts in boards up to 1-5/8 inches thick.
It is perfect for cutting boards or performing internal plunge cuts.
This product includes a 6.5-inch 24-tooth carbide-tipped blade with a 20 mm arbor and a set of adapters.
It will allow you to make straight and precise cuts over 8 feet long.
WEN CT1065 Plunge Track Saw includes an adapter set with four set screws for maximum stability.
4. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
This saw is for a handheld power saw that can rip boards up to 2-1/3 inches thick with clean, splinter-free cuts.
This product will allow you to make 45-degree bevel cuts in boards that are up to 1-5/8 inches thick.
The product is good for cutting boards or for internal plunge cuts.
This saw blade is 6.5 inches in diameter and has 24 teeth. It is made of carbide-tipped steel and has a 20 mm arbor.
This product has two clamps that can open up to 7.5 inches and have a 2.5-inch throat.
It has quick release buttons that make it easy to install and remove.
Also it has squeeze grip triggers that help provide security and support.
5. WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters & 36053C 6″ Quick Release Track Saw Clamps (2 Pack)
WEN CT9502 100-Inch Track Saw includes two 50-inch track saw tracks and a set of adapters.
This product can cut straight and precise lines for over 8 feet in length.
It also includes an adapter set with four set screws for stability.
This product includes two 6-inch F-clamps with .45 by .195 inch bars and a 2.3-inch throat.
The squeeze grip triggers on this product help to provide maximum security and support during operation.
This saw has quick release buttons that make it easy to install and remove.
It is a compatible product that can be used with all WEN Track Saw Systems.
6. WEN CT1272 12-Amp 7-1/4-Inch Variable Speed Plunge Cut Circular Track Saw
This saw can cut through boards that are up to 2.6 inches thick. It can also make plunge cuts, which are cuts that start in the middle of the board instead of the edge.
The product can cut 45-degree bevels in boards that are up to 1.85 inches thick.
The variable speed operation on this product goes anywhere from 2000 to 6000 RPM.
This is a saw blade adapter that allows you to use standard 7-1/4-inch miter and circular saw blades with a 5/8-inch arbor.
The WEN CT9502 100-Inch Track is compatible with the WEN CT992F Track Saw Clamps (not included).
7. Circular Saw Track (Circular Saw Track)
This is a cutting guide that can be used to make rip, crosscut, and angled cuts up to 50″ long in plywood, MDF, and panels.
The guide Track on this saw helps you make accurate cuts by aligning with your marks.
This saw comes with anti-slip guide strips that allow you to hold it in place without clamps.
8. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
This saw can rip boards up to 2-1/3 inches thick and makes clean, splinter-free cuts.
This saw can make 45-degree bevel cuts in boards that are up to 1-5/8 inches thick.
This is a powerful saw that can easily cut through thicker boards or make internal plunge cuts.
This is a product that includes a 6.5-inch 24-tooth carbide-tipped blade with a 20 mm arbor.
It has a compatible track saw clamp for the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw.
9. POWERTEC 71387 55″ Guide Rail Joining Set & WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
This kit includes two 55-inch guide rails and two track saw guide rail connectors.
This track saw track connector kit helps you to align your saws while connecting one guide rail to another guide rail.
This track saw is made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance.
This means that the 55” GUIDE rails can be used with Makita plunge saws and Festool track saws. It will give you clean, splinter-free cuts.
The saw can create 45-degree bevel cuts in boards that are up to 1-5/8 inches thick & perfect for cutting boards or for performing internal plunge cuts.
It also includes a 6.5-inch, 24-tooth carbide-tipped blade with a 20 mm arbor.
10. WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw
This saw can rip boards up to 2-1/3 inches thick and will make clean, splinter-free cuts.
This power saw can make 45-degree bevel cuts in boards that are up to 1-5/8 inches thick.
This is a saw blade that is good for cutting boards or for doing internal plunge cuts.
It includes a 6.5-inch 24-tooth carbide-tipped blade with a 20 mm arbor and two 55-inch guide rails, two connectors, and one track saw rail bag.
This combo provides two professional grade 55 inch track saw tracks, along with their connectors, to help deliver straight, balanced and precise cuts.
The product is easy to use and can be connected to create cuts over 9 feet.
It is made of aluminum which will not rust or corrode and is very durable.
11. WEN CT992F 7.5-Inch Quick Release Track Saw Clamps, Two Pack
The clamps can open up to 7.5 inches and have a 2.5-inch throat.
The buttons make it easy to put the product on and take it off.
The kit has squeeze grip triggers that help provide security and support during operation.
The WEN CT1065 track saw and the WEN CT9980 80-Inch tracks are compatible with each other.
It has a guide that is designed to fit the majority of track saws on the market that have .45 by .227 inch bars.