What Is The Best Tube Notcher?
We have picked The Bosch HDG11 11 piece diamond hole saw set as the best tube notcher. It has a spring loaded auto start bit and does not need a pilot hole to start. It has segmented teeth and as a result creates less heat and debris. Most noteworthy about The Bosch HDG11 11 piece diamond hole saw set is the set comes with a mandrel and an auto start pilot but.
Searching for the top tube notcher may seem like an arduous task because they all may seem incredibly similar. We have done much of the work for you by researching the best tube notcher.
First, we looked for a versatile tubing notcher that could cut many different sizes. Above all else, you need a durable tool that will not overheat and stop working mid cut.
Finally, you want a product that you can mount or hold in your hand. We found the 5 chief tube notchers in each category and listed them here for you.
Quick Navigation
5 Top Tube Notcher: Our Picks & Recommendation
- Best Overall: Bosch HDG11 11 Piece Diamond Hole Saw Set
- Best Budget: DEWALT D180005 14 Piece Hole Saw Kit
- Best Professional: Industrial Professional Pipe And Tube Notcher 3/4″- 3″
- Best For Hand Held Drill: Baileigh TN-250 For Use With Hand Held Drill
- Best 2″ Pipe and Tube Hole Saw Notcher: Woodward Fab (HECSPPIPENOTCH) 2″ Pipe And Tube Hole Saw Notcher
5 Best Tube Notcher Reviews
Best Overall Tube Notcher
1. Bosch HDG11 11 Piece Diamond Hole Saw Set

What You Will Love: The Bosch HDG11 11 piece diamond hole saw set provides lasting performance in all kinds of materials.
The Bosch HDG11 is the right product because the pilot bit has a grind that starts perfect holes with every use.
This is a spring loaded auto start bit therefore it does not need a pilot hole to start cutting.
As a result of the segmented teeth, the hole saws decrease the amount of heat and debris.
The 11 piece set comes with a plastic case and a mandrel, auto start pilot bit, and hole saws. There are nine hole saws ranging from 1/4 inch to 2 1/2 inches.
Pros:
- Segmented teeth for reduction in heat and debris
Cons:
- You must use water the entire time
[button url=”https://amzn.to/2ZohoH7″]
Best Budget Tube Notcher
2. DEWALT D180005 14 Piece Hole Saw Kit

What You Will Love: The Dewalt D180005 14 piece Hole Saw Kit is durable enough to handle high speeds.
The Dewalt D180005 14 piece hole saw kit is the best affordable notcher because it comes with enough hole saw sizes to be versatile enough for plumbing, electrical and other job tasks.
The Dewalt has hole saws that are deep cut for that reason that saw is efficient and versatile. The backing plates are hardened which prevents warping and stripping of the threads.
This set comes with a case, a small and large quick change mandrels, 11 hole saws and additional replacement parts. This is one of the cheapest dedicated notcher on the market.
Pros:
- Backing plates to prevent warping and stripping the threads
Cons:
- This saw may not hold up as well as you would expect
[button url=”https://amzn.to/3nAzgae”]
Best Professional Pipe and Tube Notcher
3. Industrial Professional Pipe and Tube Notcher 3/4″- 3″

What You Will Love: The Industrial Professional Pipe and Tube Notcher 3/4″ – 3″ is adjustable to 50 degrees.
The Industrial Professional tube and pipe notcher 3/4″ – 3″ is the best hole saw because it creates tube notches in 3/4 inch and 3 inch tubing.
You can adjust this up to 50 degrees. It can also accept any hole saw that is a standard size.
Most noteworthy is that the Industrial Professional Pipe can mount on a vise or bench and works with any drill that is 1/2 inch.
Pros:
- This design has professional fabricator in mind
Cons:
- The hole saw is not included
[button url=”https://amzn.to/2ZuxwXu”]
Best Tube Notcher For Use with Hand Held Drill
4. Baileigh TN-250 Tube Notcher For Use with Hand Held Drill

What You Will Love: The Baileigh TN-250 Tube Notcher For Use with Hand Held Drill is mountable to a bench or vise.
The Baileigh TN-250 for use with hand held drill is one of the best hand tools for cutting.
You can operate it manually and adjust it to a limitless amount of angles.
The Baileigh TN-250 is intended for use with a one inch and two and a half inch pipe. It has a radial vise that centers itself and the user can clamp down the pipe notcher and move it in any direction.
Pros:
- Self centering radial vise
Cons:
- Expensive
[button url=”https://amzn.to/3mozZMs”]
Best 2″ Pipe and Tube Hole Saw Notcher
5. Woodward Fab (HECSPPIPENOTCH) 2″ Pipe and Tube Hole Saw Notcher

What You Will Love: The Woodward Fab (HECSPPIPENOTCH) 2″ Pipe and Tube Hole Saw Notcher can cut up to 60 degrees.
The Woodward Fab (HECSPPIPENOTCH) is one of the best tube cutting tools.
You can use it on 1 inch or 2 inch pipes. The vice tightens down to 1 inches. The Woodward Fab pipe and tube hole can create any angle saddle notch for the right weld fit.
You can use the Woodward Fab with any 1/2 inch drill motor or press. The machine holds a 2 inch pipe and uses a 2 1/2 inch hole saws. You can adjust the angle by 1 degree up to 60 degrees.
Pros:
- The angle can be adjusted by one degree at a time
Cons:
- This is a middle range hole saw notcher
[button url=”https://amzn.to/2ZEKGBR”]
We reviewed the best tube notcher on the market. We looked for tube notchers that cut various pipe sizes for different trades. We looked at the various clamps for their effectiveness and for those that have self centering radial vise.
The 5 listed here are the foremost tube based on the value and the durability of the tube notcher. Check them out before making your next purchase.
Related Articles: