The Wen 6552t Planer is an Industry-leading Benchtop Power Tool That Gives You More Than Enough Power for Woodworking Projects
What We Like
- Offers 25, 500 cuts per minute
- 3-blade benchtop for more efficiency
- Perfect weight for optimized performance
- 15 AMP motor
- Functional indeed and outfeed table
- Maintains the same level of thickness across the board
- Dust port included
- 2 years warranty
What We Don’t Like
- It’s unsafe
- Unreliable feed rollers
- Expensive
Bottom Line
The Wen 6552t Planer review shows that it is one of the most popular thickness planers in the market. This thicknesser does the job it is expected to do because it is fully equipped with a combination of features that make it ideal for every hobbyist who needs a new cutting tool in their workshop.
However, the Wen 6552t Planer isn’t as safe or durable as we had expected from a thicknesser that costs more than $300.
The feed rollers are unreliable. You need to take extra care during use to avoid workshop injury in case a part of the board shoots out of the machine while the motor is still running.
Axes and chainsaws are great for cutting wood into large pieces. However, they don’t give you the kind of precision you’ll get when you use band and miter saws.
When it comes to trimming wood until you get a consistent level of thickness from the top to bottom, you need a thickness planer. The WEN 6552t Planer is one of the best money can buy. It is strong, durable, and the number of cuts per minute is commendable.
This 66-pound heavy thickness planer will save you time and energy in the workshop.
The functional dust port attached to this planer ensures that your work area is clean and the motor keeps the dual-edge blades running fast and sharp. The 15 AMP motor is just one of the many factors that make it a good trimming tool.
In our Wen 6552t Planer review, every one of the features will be discussed in detail. Hopefully, we will be able to help you determine if it is the right tool for you.
Related article: Jet JJP-8BT Jointer/Planer Combo Review
Features of the Wen 6552t Benchtop Corded Thickness Planer
3-blade Benchtop
The Benchtop of a thicknesser is where most of the magic happens. With the right Benchtop, you can trim different forms of wood without stress.
You don’t need to apply too much pressure on the planner as it does most of the work. This makes it more precise and easier to use than the handheld planner.
The three blades on the Wen 6552t Planer can be used to generate planes. In woodworking, planes refer to the evenly smooth wooden surfaces. The blade’s cutting capacity is 6-inches thick and 13 inches wide.
This is far more than what any handheld planner can offer. Even some other motorized planers do not come with this cutting capacity. Many other thickness planers have just one blade.
The 6552t has three blades for extra efficiency and productivity. All the blades are sharp so you don’t need to worry about re-sharpening them right after you purchase it.
25, 500 Cuts Per Minute
The Wen 6552t Planer is the product you should go for whenever you’re looking for ways to make precise cuts without multiple passes.
You can get 25, 500 cuts per minute and this is one of the best you’ll get in the industry. The blade isn’t the only thing that is going to help you get 25, 500 cuts per minute.
The main thing that makes this possible is the 15 AMP motor. When the material is put in position, all you have to do is switch it on and the motor will power the blades into action.
When you turn it off or use the brakes, the motor stops spinning automatically within a few seconds.
The motor has more than enough power to trim the toughest types of wood consistently and with ease. The same cannot be said about other thickness planers.
Adjustable Drive and Functional Infeed and Outfeed Table
The Wen 6552t Planer can be easily adjusted to meet your needs. There is a rubber-grip handle that is comfortable to hold when you’re trimming.
Using the handle, you can adjust the height of the machine. When you need maximum precision, you can pick the highest option which is 1/64 of an inch.
The infeed and outfeed table of the Wen 6552t Planer is also adjustable. The infeed table can be made wide enough to fit broad materials giving you enough room to meet the demands of a high feed rate no matter the width of the wood.
Keep in mind, however, that we don’t recommend using this thicknesser for materials that are more than 6 inches thick and 13 inches wide.
The safety concerns mentioned above are more threatening when you’re trying to trim wood that is above the level.
Related reading: Wen 6550T Thickness Planer Review
Perfect Weight and Dust Port
The weight of a planer is one important factor that is often overlooked. You need to pay attention to this because there is such a thing as the perfect weight when it comes to thickness planers.
The Wen 6552t Planer weighs about 66 pounds with a dimension of 25.25 x 21.75 x 16 inches.
So, it’s light enough to be carried from place to place but not so light that it wobbles when you’re trying to trim heavy materials.
The fan-assisted dust hose connection port adapter can be used to attach any dust bag from 2 to 4 inches.
It takes up most of the debris produced during trimming keeping your workshop clean.
Related article: Triton TPL180 1500W Triple-Blade Planer
Wen 6552t Planer Review The Verdict
The review above has revealed that it is a great product for woodworkers who don’t handle many high volume projects daily.
While the motor is powerful and durable, the feed rollers can be unreliable sometimes. More than one buyer on Amazon complained about the feed rollers losing their position while the motor was running.
This can lead to serious injury in the workplace. So, make sure that you always maintain some space between you and the Wen 6552t Planer when it is on. There is also the issue of price. You’ll need between $300 to $350 to buy one from Amazon.
